Q: I am a strong swimmer; will those suction cups hold me?

A: The suction cups hold up to 25 lbs of pressure each. AquaVee  uses 4 suction cups per unit. That results in a total of 100 pounds of support per unit (4 suction cups).  The support of the suction cups combined with the absorption of energy provided by the bands and bungee of the Vee attachment is enough to hold ANY swimmer. It has been tested by collegiate sprinters specifically trying to pull the suction cups off the wall to no avail. The suction cups will hold. Watch video here...

Q: What size belt should I get?

A: The Aquavee inflatable belt comes in three different sizes, Small, Medium , and large.

The small belt can accommodate a waist size from 24 inches to 32 inches, Medium 32 inches to 36 inches and large 36 inches to 45 inches. If your waist size is on the cusp of 32 inch or 36 inch, it is recommended to get the smaller size if you plan to use the Aquavee regularly to reduce your waistline.


Q: I do not know how to swim, should I use AquaVee?

A: AquaVee is intended for swimmers of any level and can be used as a teaching aid with a swim coach; however, you must first learn how to swim before using AquaVee without a swim coach


Q: I have a porous border tile in my pool; will the suction cups stick to my tile?

A: Yes, included with your AquaVee Swim System kit are 4 clear polycarbonate thin sheets and a tube of clear waterproof silicone adhesive. The owner’s manual will instruct you in detail where and how to adhere the clear inserts in your pool. The inserts will not be apparent in your pool due to its transparent nature. Once installed (installation is a one time 5 minute process) the suction cups will attach to the clear inserts when you are ready to swim. Please refer to the owner's manual for installing inserts.  Watch video here

Q: I have small ceramic border tile in my pool; will the suction cups stick to my tiles?

A: Yes, included with your AquaVee Swim System kit are 4 clear polycarbonate thin sheets and a tube of clear waterproof silicone adhesive. The Owner's manual will instruct you in detail where and how to adhere the clear inserts in your pool. The inserts will not be apparent in your pool due to their transparent nature. Once installed, (installation is a one time 5 minute process) the suction cups will attach to the clear inserts when you are ready to swim. The suction cups will stick to any tile because of the clear inserts. Watch video here

Q: I have a smaller than normal pool, will AquaVee work in my pool?

A: The in-stock AquaVee Swim System will work in pools 20 feet or longer. You can separately purchase different size clip-on bands that will allow you to swim in pools 14 feet or larger.
Click here to see this product...

Q: I have a concrete, PebbleCrete or PebbleTec border surrounding my pool, not ceramic tile, will the AquaVee work for me?

A: The AquaVee products have been tested on many different types of pools including pebbletech and pebblecrete pools. The unique anchoring system with the polycarbonate sheets creates a smooth surface for the suction cups to adhere to, and allows the AquaVee to work in any underground pool. Please click on the link below to check out the “Installing the System Video”. This will better explain the installation of the polycarbonate inserts. Keep in mind the inserts will remain in your pool and will be there to use when you are ready to swim and/or do you Pilates Plus exercises. They can also be peeled off with ease if, for any reason, you would like to remove them.  Click here to see this product...
 

Q: I have an irregular shaped pool, will AquaVee work for me?

A: Yes, as long as you have 14 or more feet of pool clearance from the wall where you will be attaching the AquaVee, then AquaVee will work for you. You can purchase separately from our online store different size clip-on bands that will allow you to swim in pools 14 feet or larger.  Click here to see this product...

Q: I have a fiberglass Pool, will the AquaVee Work in my Pool?

A: The AquaVee works great in fiberglass pools. Just attach each pair of suction cups at on the pool wall just under the water line any where from 10 to 14 feet apart and start swimming or exercising. AquaVee also works great off fiberglass boats. Check out the video here...
 

Q: My pool has rounded edges, will AquaVee work for me?

A: Yes, the suction cups will hold while being pulled from any angle. Our test results have proven that the angle of the pull does not affect the holding power of the suction cups. The suction cups will not slide regardless of the angle.

Q: I have an above ground pool with vinyl coping, will the AquaVee work for me?

A: If you have a deck surrounding the rim of your pool, you may install the polycarbonate sheets on the deck about 12 to fourteen feet apart just outside the edge of the pool. Attach the suction cups to the polycarbonate sheets and you are ready to start swimming and/or pilates.
Check out the installation video here...

Q: I live outside the United States, how can I order the AquaVee?

A: We are currently selling internationally via our website www.aquaveeonline.com. It takes about 3 to 5 days for USPS Express mail and up to 10 days for USPS Priority mail to deliver to Europe, South America and Australia. When placing the order, select the method you prefer and the exact shipping charge will appear on the shipping options available prior to order confirmation. All AquaVee products have a 60 day satisfaction guaranteed for international orders. If you are not satisfied with the AquaVee, you may return it for a full refund.

Q: What is the difference between the Portable Swim System and the Pilates Plus System?

A: The Swim System is for swimming only in any style (FREESTYLE, BACKSTROKE, BREASTSTROKE AND BUTTERFLY). The Pilates Plus will enable you to swim just as the Swim System and allow you to get a COMPLETE FULL BODY stand up vertical workout. 
Check out the video.

Q: Am I required to do anything before using the AquaVee?